RETURN TO
MAIN PRODUCT DIRECTORY
|
Products
are shown with fabric for display purposes only. |
All
products intended to be covered with fabric are
made of black ABS plastic. |
|
|
800-428-7114
| ACCESSORIZE YOUR DASH |
A cool interior needs a well appointed dash.
Here's what you need to get started! |
|
|
800-428-7114
| Underdash
Cover |
 |
This clean, finished look hides dangling
wires and gives you more area for mounting A/C vents, climate
controls, ignition switches, and light accessories. |
Underdash Covers
are offered in kits for certain applications as shown below. The
Underdash Cover is made of ABS plastic in two sections — a 16"
wide for the left side of the steering column and 44" wide for
the right side. The covers are 18" deeps from the dash to the firewall.
The front lip is 6" high and can be trimmed to fit the contour
of the dash or to allow for gauges or other accessories below the
dash.
An AC slide control plate pod is included with each kit. It allows
you to mount your slide control plate into the cover and not have
to cut the dash itself. The pod also makes a great place to locate
all those extra switches without cutting into the dash.
Four galvanized mounting brackets are included. They can be cut
with tin snips as required for your installation.
The 3/4" radius front lip is bent at an 120 degree angle that allows the Underdash Cover to be bent down to cover any air conditioning unit or accessories before the front lip goes vertical. |
KIT 1
For 1934 and older cars and trucks. Kit includes one 44" x 18"
x 6" section with brackets, pod and installation kit. |
KIT 2
For 1935-59 cars and trucks. Kit includes one 44" x 18" x
6" section, one 16" x 18" x 6" sections for left of the steering column,
with
brackets, pod and installation kit. |
KIT 3
For 1960 and newer cars and trucks. Kit includes one 44" x 18" x
6" section, one 16" x 18" x 6" sections for left of the steering
column,
with
brackets, pod and installation kit. |
| |
|
|
| |
|
|
KIT 4
Underdash Cover to work with our Center Console. Kit includes two 35" x
18" x 6" sections with brackets and installation kit. This unit works
great if you are extending the console up to meet the dash and want to finish
off the underside, as well. |
|
|
|
|
|
| |
|
|
|
800-428-7114
| 1932
Coupe Underdash Cover |
  |
| Fits under existing
dash extending down and wrapping under back to firewall. Both the
front and under surfaces
provide considerable space for gauges, switches, stereo equipment,
hide-a-vents, hide-a-gauges (shown above) and air conditioning. |
|
|
| |
|
| |
|
| |
| |
| |
|
| Steering
Column
Cover |
 |
Another fast, easy and clean way to hide wires
along steering columns. |
|
Kit Includes: Column Cover with two galvanized
brackets.
Length: 32 inches
Depth: 9 inches
Diameter: Tapers from 2-3/4" to 4" to fit the various column drops. |
| |
|
|
| |
|
|
|
800-428-7114
| Gauge Clusters |
| Same as 3 Gauge Insert only without cap |
 |
 |
| These 3 and 4 gauge Cluster Mounts are exclusively from RodDoors. Can be mounted into our Underdash Cover |
|
Gauges are angled to give the driver quick, clear readouts. |
| 3 Gauge insert cluster 2-1/8" RD2001 |
$29 |
|
| 3 Gauge insert Cluster 2-1/8" With Cap rD2002 |
$79 |
|
| 4 Gauge insert cluster 2-1/8" RD2003 |
$39 |
|
| |
|
|
|
Hide-A-Gauge/ Hide-A-Radio |
 |
|
 |
| Hide-A-Gauge-gauges sold separately RD2110 |
$279 |
|
With Hide-A's,
you cut out the opening for the unit in the Underdash Cover, preserving
your original dash. Follow our easy install instructions and your
Gauges or Radio will make their appearance only when the Ignition Key is on.
With the Key off they close up flush with the Underdash Cover. |
| Hide-A-Radio-Radio sold separately rD2120 |
$279 |
|
| |
|
|
| |
|
 |
| |
|
Solenoid
Only
(One Required) RD2130 |
$24 |
|
| |
|
|
Hide-A-Vent |
 |
With Hide-A-Vents,
you cut out the opening for the vents in the Underdash Cover, preserving
your original dash. Follow our easy install instructions and your
A/C and heating vents make an appearance only when the fan is on.
When the fan is off, they close flush with the Underdash Cover. |
|
3"
vent for
2" flex hose |
$99 |
|
|
Solenoid
and
Relay Kit RD2131 |
$49/kit |
|
| |
|
|
| |
|
Solenoid
Only
(One Required) RD2130 |
$24 |
|
| |
|
|
|
Map Pockets |
 |
 |
no picture available |
 |
The Universal Kick Panel Map Pocket can be cut to fit most any kick panel space. |
|
| 13" Map Pocket- priced each RD4041 |
$49 |
|
| Kick PanelMap Pocket-Priced each RD4040 |
$49 |
|
| Underdash Package Tray-Map Priced each RD4040 |
$49 |
|
| |
|
|
| 23" Map Pocket-Priced each RD4042 |
$59 |
|
|
|
| |
|
|
| |
|
|
| |
|
|
Under Dash Extention/ Wiper Cover |
 |
|
The Underdash extention is for those that don't need the full cover underneath the dash. Includes end caps should the cover have to extend into the door frame.
48"L x 7"W x 7"H |
The Wiper Cover is for those that need to cover the wiper motor mounted above the windshield. Includes end caps should the cover have to extend into the door frame.
48"L x 7"W x 7"H |
TIP: You can cut openings for radios, AC vents, switches, gauges, and controls. Makes a great mount for our Gauge Cluster units. Fits Model A up to '41 Model cars and trucks. |
| Underdash Extention/Wiper Cover- priced each RD2000 |
$ 99 |
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
