| Hwy 22 Modular Wiring System from American Auto Wire |
|
|
|
Highway Modular Panel System Features:
PRE-ENGINEERED FOR POWER
- •Developed to handle the most demanding power requirements and accessories
- •Enhanced 6 gauge buss bars give you an additional level of quality
- •Non-Conductive G-10 body and backplate prevent accidental shorting or grounding from fuses or loose connections
- •Longer coils of wire provide greater flexibility in placing the fusebox where YOU want it
- •Superior 175 Amp protection with our MegaFuse Kit
- •Screwdown locking system gives you a scientifically proven vibration proof connection
Take the Highway to Wiring! Its as easy as ABC!
Wiring your modified vehicle doesn’t have to be a confusing process anymore. American Autowire’s Modular Panel Systems come with complete, easy to understand instructions to guide you through every step. Start with Bag A and put everything else aside for now. When you’ve completed Bag A, you’ll be rewarded by the ability to start your vehicle. Each bag comes with its own reward taking you closer towards completing your dream. |
|
FEATURES
- 22 power circuits supported through 15 fuses and 1 circuit breaker
- Battery and accessory power tap studs provided for system expansion
- Panel protected with a 175 amp Mega-Fuse junction block with a 8 gauge panel feed wire
- Nylon mechanically secured panel containing secondary push-back locks, has a 7-1/2” x 4-1/2” footprint, 3-3/8”in height, and mounted on a (G10) non conductive epoxy base
- All power buss bars are constructed of 6 gauge copper
- All wires are constructed from heat resistant (-60F- +275F)
- GXL heavy-wall wire with laser printed circuit identification every 2 inches
- GM color coded wires for ease of installation
- All power circuits wires are 12 gauge constructed
- New front loaded vibration proof self- locking (Hooke’s Law) screw down terminal connection
- Dedicated battery and ignition circuits for electronic fuel injection (EFI) Kit contains 3 relays (Horn, Turn Signal & 40 amp Electric Fan or Fuel Pump)
- Turn signal and hazard flasher circuits provided
- 8 gauge alternator feed wire provided
- The kit is set-up for a GM “SI” internally regulated alternator or GM 1-wire
- Alternator diode is also provided
- Kit includes 3 (In-dash Ignition, Headlight & Alum. Knob and Floor Dimmer) switches
- GM in-column ignition switch connectors provided, along with 3-7/8” GM steering column connectors with male and female terminals
- Plugs directly most 69-74 GM column and most after market steering columns or use the terminals and connector provided to mate to any column
- Spare circuits available (for power windows, locks, cruise, etc.).
- Engine compartment (oil pressure, water temp, tach, starter, neutral safety, brake switch, ignition switch, distributor (GM HEI or Points), coil, main power and alternator)
- Chassis wiring (fuel pump, electric fan, headlights, running lights, brake lights, 3rd brake lt., directional, license plate, radio, heat & AC, and wipers)
- Full color schematic of overall vehicle wiring along with individual harness subkit instructions for trouble-free installation.
|
|
|
